This article demonstrates configuring physical IP phones for CommPeak VoIP services using PBX Stats credentials. It provides setting examples for Yealink, Grandstream, and Fanvil IP phones.
TIP
You can also configure it with your SIP account username and password from you CommPeak Portal account. For more details, please refer to this article.
Login Credentials
As login credentials for an IP phone, you will need a device number and password from PBX Stats, as well as the name of your PBX domain.
In PBX Stats, go to Configuration -> Devices. Find the device you want to register in the IP phone and copy its credentials.
Configuration Examples
The following sections contain configuration examples for several IP phone models.
Yealink
Label: the name that will be shown on the phone screen display
Display Name: same as Label
Register Name: the device number from the PBX Stats Devices section
User Name: same as Register Name
Password: the device password from the PBX Stats Devices section
Transport: UDP
Server Host: your PBX domain name
Server Expires: 60 seconds
Grandstream
Account Name: the name that will be shown on the phone screen display
SIP Server: your PBX domain name
Outbound Proxy: leave blank
SIP User ID and Authenticate ID: the device number from the PBX Stats Devices section
Authenticate Password: the device password from the PBX Stats Devices section
Name: same as Account Name
Fanvil
Username: the device number in the PBX Stats Devices section
Display name: name that will be shown on the phone screen display
Authentication Name: same as Username
Authentication Password: the device password from the PBX Stats Devices section
SIP Proxy Server Address: your PBX domain name